Full size bed with storage-When many people think of crafting a storage bed themselves that they shy away from the project due to complex plans that involve tendon joints, chain saws, miter cuts and so on. Simplify project by turning prefabricated storage cubbies to an attractive, modern full size bed with storage. If you cannot find long storage cubbies, use modular storage cubes for the base instead.
Painting cubbies and a sheet of 3/4-inch plywood or MDF size 40-by-80 inches, if desired. Place the two cubbies back to back on the ground, so that the storage cubbies running either side. The ends should be flush. Place the plate in MDF or plywood on top cubbies so that the edges of the plywood or MDF sheets off around the edges of the cubby units.
Drill recessed guide hole size slightly smaller than 1 5/8 inch wood screw around the circumference of MDF or plywood sheets, and a double line around 1 inch from each side of the middle of plywood or MDF sheets. Run a 5/8 inch screws through the pilot holes to attach the plate downward. There should be a screw about every 5 to 6 inches. Place the double full size bed with storage space in the bedroom and place a twin mattress on top.Commercial bar, commercial restaurant furniture, full size bed with storage drawers and headboard, full size bed with storage diy, full size bed with storage and trundle, full size bed with storage and mattress, full beds with storage drawers underneath, full bed with drawers and headboard, design of rollong store or pushcart, storage bed with drawers on one side